beautypg.com

Advanced bios features – BECKHOFF CX1020 User Manual

Page 90

background image

Assembly and connecting

88

Embedded PC

Advanced BIOS Features

This menu is used for setting the data of the first hard disk connected to the IDE bus as master. The hard disk data
(size, number of cylinders, heads, sectors, pre-compensation and home position of the heads when the disk is
switched off) are displayed automatically for the connected hard disk.

Phoenix - AwardBIOS CMOS Setup Utility

Advanced BIOS Features

► CPU Feature

[Press Enter]

Item Help

Virus Warning

[Disabled]

CPU L1 & L2 Cache

[Enabled]

Quick Power On Self Test

[Enabled]

First Boot Device

[LS120]

Second Boot Device

[HDD-0]

Third Boot Device

[LS120]

Boot Other Device

[Enabled]

Boot Up NumLock Status

[On]

Gate A20 Option

[Fast]

Typematic Rate Setting

[Disabled]

Typematic Rate (Chars/Sec)

6

Typmatic Delay (Msec)

250

Security Option

[Setup]

APIC Mode

[Enabled]

MPS Version Control For OS

[1.4]

OS Select For DRAM > 64 MB

[Non-OS2]

Report No FDD For WIN 95

[No]

Full Screen Logo

[Disabled]

↑ ↓ → ← :Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:Help

F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults

CPU Feature
This menu item can be used for setting the CPU behaviour for thermal profiles.

Virus Warning
On start-up the boot sectors are checked for changes since the last start. Setting options: Enabled (a virus warning
may appear until it is acknowledged with Confirm or switched off (Disabled)), Confirm (a required boot sector
modification, e.g. after reinstallation of an operating system, is confirmed), Disabled (boot sectors are not verified).

CPU L1 & L2 Cache
The cache memory is an additional memory that is substantially faster than the conventional DRAM (system
memory). If the CPU requests data, the system transfers theses data from the main DRAM to the cache memory for
faster access by the CPU. Setting options: Enable (standard) - cache activated, Disabled - cache deactivated.

Quick Power On Self Test
If this option is enabled the computer will start significantly faster. Booting will be up to 50 seconds faster with 64 MB
RAM or more. However, not all POST tests are carried out.

First Boot Device
Here you can specify which drive should boot first. Set the drive to be used as boot drive. Options:

This manual is related to the following products: