Directed Electronics Hornet 564T - Manual (Page 50)

5 50 0 © 2005 Directed Electronics, Inc. Vista, CA
sshhuuttddoowwnn ddiiaaggnnoossttiiccss
1. With the ignition OFF, press and H HO OLLD D the Valet/Program button.
2. Turn the ignition ON and then back OFF while H HO OLLD DIIN NG G the Valet/Program button.
3. Release the Valet/Program button.
4. Press and release the Valet/Program button. The LED will report the last shutdown for one minute or until
the ignition is turned on.
lloonngg tteerrm m eevveenntt hhiissttoorryy
The system stores the last two full triggers in memory. These are not erasable. Each time the unit sees a full
trigger, the older of the two triggers in memory will be replaced by the new trigger. To access long term event
history:
1. With the ignition off, press and H HO OLLD D the Valet®/Program switch.
2. Turn on the ignition.
LLEED D FFLLA ASSH HEESS SSH HU UTTD DO OW WN N M MO OD DEE
One Timed out
Two Over-rev shutdown
Three Low or no RPM
Four Transmitter shutdown (or optional push-button)
Six (-) Shutdown (H3/3 GRAY) or (+) Shutdown (H3/4 BROWN)
Seven (-) Neutral safety shutdown (H3/6 BLACK/WHITE)
Eight Wait-to-start timed out
ttoo ppeerrffoorrm m sshhuuttddoow wnn ddiiaaggnnoossttiiccss