Directed Electronics Hornet 564T User Manual

Page 5

iinnssttaallllaattiioonn ppooiinnttss ttoo rreem

meem

mbbeerr

IIM

RTTA

NTT!! This product is designed for fuel-injected, automatic transmission vehicles only.

Installing it in a standard transmission vehicle is dangerous and is contrary to its intended use.

■ Please read this entire installation guide before beginning the installation. The installation of this remote

start system requires interfacing with many of the vehicle’s systems. Many new vehicles use low-voltage or

multiplexed systems that can be damaged by low resistance testing devices, such as test lights and logic

probes (computer safe test lights). Test all circuits with a high quality digital multi-meter before making con-

nections.

■ Do not disconnect the battery if the vehicle has an anti-theft-coded radio. If equipped with an air bag, avoid

disconnecting the battery if possible. Many airbag systems will display a diagnostic code through their

warning lights after they lose power. Disconnecting the battery requires this code to be erased, which can

require a trip to the dealer.

■ Check with the customer on status LED location.
■ Remove the domelight fuse. This prevents accidentally draining the battery.
■ Roll down a window to avoid being locked out of the car.

■ Test all functions. The “Using Your System” section of the Owner's Guide is very helpful when testing.
■ When testing, don’t forget that this system is equipped with Nuisance Prevention Circuitry™(NPC™). NPC can

bypass trigger zones, making them appear to stop working. See the

Nuisance Prevention Circuitry section.

■ Review and complete the Safety Check section of this guide prior to the vehicle reassembly.

aafftteerr tthhee iinnssttaallllaattiioonn

bbeeffoorree bbeeggiinnnniinngg tthhee iinnssttaallllaattiioonn