Directed Electronics Hornet 564T - Manual (Page 40)

4 40 0 © 2005 Directed Electronics, Inc. Vista, CA
5. TTrraan nssm miitt.. The transmitter is used to select the desired setting. Pressing will change
the feature to the LED ON setting (or will flash once for features with more than 2 set-
tings). The sire will chirp once (if connected). Pressing will change the setting to the
LED OFF setting (or will flash two or more times for features with more than 2 settings).
6. R Reelleeaassee.. The Valet®/Program switch can now be released.
You can advance from feature to feature by pressing and releasing the Valet®/Program switch the number of times
necessary to get from the feature you just programmed to the feature you wish to access. For example, in Menu
One, if you just programmed Feature 1-2 and you next want to program Feature 1-3 to off, release the
Valet/Program switch. Press and release it once to advance from Feature 1-2 to Feature 1-3. Then press it once
more and H HO OLLD D it. The LED will flash in groups of 3 and the horn will honk 3 times (if connected) to confirm that
you have accessed Feature 1-3.
The learn routine will be exited if:
■ The door is closed.
■ The ignition is turned on.
■ The Valet/Program switch is pressed too many times.
■ More than 15 seconds elapses between programming steps.
One siren wail sound indicates that the Learn Routine has been exited.