BDI 9221 VEXA - Manual (Page 3)

VEXA
9221 9224 9234 9239
ASSEMBLY INSTRUCTIONS
3
BDIUSA.COM [email protected]
Step 4
Install Shelf Frame
Turn unit over onto the wheels. Determine shelf position, then tighten Shelf
Pins (C) into holes in Front Frame (E) and Leg Frames (F) with 5mm Hex
L-Wrench (A1). Make certain all Shelf Pins (C) are in the same level holes.
Install Shelf Frame (H) with small holes facing up and allow Shelf Frame
(H) to rest on Shelf Pins (C).
Step 5
Install Rubber Bumpers
Install Rubber Stem Bumpers (D) into Front
Frame (F) and Leg Frames (G) and Shelf
Frame (I).
Install Rubber U-Channel (E) onto Back
Panel (H) near the center of the panel.
E
H
D
D
E
H
D
G
F
I
G
Small holes facing up
A1
C