BDI 1542 Crease User Manual
Crease

1
crease
1542 1546
1548 1549
Crease is engineered for easy assembly.
Carefully follow this procedure to prevent any
damage.
NOTE: This instruction sheet is intended for
the entire Crease table collection; model 1542
is shown for illustration.
Placement and Maintenance
Crease is designed for indoor use on level floors.
Clean glass with glass cleaner, wood and steel
parts with a moist cloth.
Many wood surfaces
are subject to fading under direct sunlight. BDI’s
unique Graphite finish has properties that make it more sensitive
than others. Please avoid placing BDI’s Graphite finish in direct
sunlight.
Step 1
Unpack and Identify
Unpack and identify the components at left. The assembly
workspace should be a non-marring surface such as carpet. For
missing hardware pieces, please contact BDI Customer Service
at [email protected]. For all other concerns, please
contact your BDI Retailer.
Step 2
Attach Legs to Glass Top
Slide the
Removable Glass Spacer (F) over each top end of
the
Leg (C) as illustrated in Fig.1. Place Glass Top (D) upside
down on soft surface in order to prevent damage. Hand tighten
Legs (C) to Glass Top (D) using Screws (B). Ensure that the
Removable Glass Spacers (F) are pressed up against the edge
of the
Glass Top (D) and tighten Screws (B) using Hex Wrench
(A).
Component List
Designed by Dan Fritz .
These distinctive product configurations are protected by US and
international patents, trade dress, and/or copyright laws.
BDI is trademark of Becker Designed, Inc.
All rights reserved. ©2013, BDI
Made in China. 1542154615481549REV10242013v1
B - 1/4-20 x 12mm Screw
1542 x 8
1546 x 8
1548 x 10
1549 x 8
D - Glass Top x 1
C - Leg x 2
E - Wood Shelf x 1
F - Removable
Glass Spacer x 4
(REMOVE SPACER
AFTER ASSEMBLY)
A - 4mm Hex Wrench
x 1
a s s e m b l y
i n s t r u c t i o n s
bdiusa
.
com
customerservice
@
bdiusa
.
com
TWO PERSON ASSEMBLY
C
Fig. 1
F
F
B
C
D
Removable
Glass Spacer