BDI Semblance modular system - Manual (Page 22)

3 2
Plan Ahead.
To plan unit placement, refer to
Package Reference Booklet for
critical dimensions.
!
The assembled unit CANNOT
be moved, so carefully plan the
placement of the unit prior to
building.
2:
Using the selected spacing dimension
above, measure from the outside edge of
where the left End Panel will be placed
and mark the wall to indicate the Divider
Panel’s location.
1:
Select the shelf spacing below that reflects
the far left bay of your unit (Double-Wide
or Single-Wide)
3:
Measure from the mark near the floor
using the illustrated dimension below.
Make a vertical line on the wall to indicate
the center line of the U-Bracket.
Note:
Future placement of left End Panel
Single-Wide:
17.75 in / 452 mm
Double-Wide:
33 in / 837 mm
27 in
/ 686 mm