BDI Semblance modular system - Manual (Page 21)

1 PB
LOW SEMBLANCE
Low Semblance System
Your SEMBLANCE System Furniture is
engineered for easy assembly.
Carefully follow this procedure to prevent
any damage.
Placement and
Maintenance
SEMBLANCE System Furniture is
designed for indoor use on level floors.
Clean glass with glass cleaner, steel parts
and wood veneer with a moist cloth.
You will need:
Which Low Semblance unit are you building?
32"
If the unit consists of any tall panels, BDI
recommends installing a Wall Bracket
supplied in any 15020 or 15021 End
panel packaging.
Refer to Main
Assembly Instructions
for Wall Bracket
installation as well as
shelf and cabinet
assembly.
If the Low unit consists of any Cabinets,
Drawers, or Desks you are not required
to install a U-Bracket.
Refer to Main Assembly Instructions
for proper assembly of shelves and
cabinets.
If the Low unit consists of
ONLY shelves you MUST
install a U-Bracket supplied
in any 15023 End Panel 29
packaging. This configuration CANNOT
be oriented as a room divider.
Instructions are
inside for proper
installation for
U-Bracket.