BDI 6004 Sequel - Manual (Page 9)

9
a s s e m b l y i n s t r u c t i o n s
bdiusa.com [email protected]
sequel
®
6004
wall
-
mounted desk
Step 16 (Optional)
Remove Adhesive Foam/Magnets (X) from the Power Strip Bay (T). Peel film from
side of the Adhesive Foam/Magnets (X) and attach to clean, dry back side of AC power
strip (not included). Cleaning of power strip surface with rubbing alcohol will ensure
best adhesive bond. **UNPLUG POWER STRIP FROM POWER SOUCE BEFORE
CLEANING**
Attach AC power strip/surge protector (not included) on platform of
Power Strip Bay (T) as shown in illustration below.
Use the slot holes provided to run all wire to and from the desk. Keep
all wire behind the folded metal lips. Failure to do so will prevent Kick
Panel (E) from attaching properly.
T
X
X
1.
2.
3.
* AC Power Strip Not Included