BDI 6004 Sequel - Manual (Page 8)

8
a s s e m b l y i n s t r u c t i o n s
bdiusa.com [email protected]
sequel
®
6004
wall
-
mounted desk
Step 15
With the help of another person gently lower Top Glass (F) onto Drawer Assembly (B) and
fasten into place using Screw (W) and Hex Wrench (H). With the grippy side facing down,
insert Drawer Liner (V)into drawer body.
W
W
W
B
F
V x 1
W x 3
TWO PERSON ASSEMBLY
Step 14
Duplicate the wall attachment method used on the outermost screws from Step 3 for attaching
Wire Management Trough (D) to the wall. If Toggle Anchors were used on Step 3, use
standard Drywall Anchors (L) for this step. Attach Wire Management Trough (D) to wall
using Screw and Washer (J) combination. DO NOT OVERTIGHTEN!
J
D
B
D
J