Sequel – BDI 6003 Sequel User Manual

Page 6

SEQUEL

6003 Compact Desk

ASSEMBLY INSTRUCTIONS

Step 10

Install Front Kick Panel

Place Desk in desired location. Once all of the electrical wires are

routed, install

Front Kick Panel (N) as shown. Insert bottom edge of

Front Kick Panel (N) into Lower Horizontal Beam (L). Tilt Front Kick

Panel (N) back until magnets hold panel in place.

Note: The Sequel™ Desk is designed to permit placement in front of an

electrical outlet for easier wiring access.

Step 11 (optional)

Attach Back Panel

Back Panel (O) Sequel™ 6008 (sold seperately) is designed

to conceal wire management if desk is located in the middle

of a room.

Insert bottom edge of

Back Panel (O) into Lower Horizontal

Beam (L). Tilt Back Panel (O) foward until magnets hold

panel in place.

Front Kick Panel (N)

Back Panel (O)

Sequel™ 6008

(sold seperately)

Lower Horizontal Beam (L)

Top edge of

Back Panel (O)

is angled