BDI 6001 Sequel - Manual (Page 8)

8
assembly instructions
bDiusa . com customerservice @ bDiusa . com
Step 11
Place Sequel Desk in desired location. Once all of the electrical wires
are routed, install Kick Panel (D) as shown above. The rear side of
panel has magnets that will hold the panel in place. Note: The Sequel
Desk is designed to permit placement in front of an electrical outlet
for easier wiring access.
Optional Step
The Back Panel (C) is provided to conceal wire management, if desk
is located in the middle of a room,.
D
C