BDI 6001 Sequel - Manual (Page 7)

7
assembly instructions
bDiusa . com customerservice @ bDiusa . com
Step 7 (optional)
Attach Magnets to AC power strip/surge protector
Remove Adhesive Foam/Magnets (I) from the Upper Horizontal Beam (N).
Peel film from side of the Adhesive Foam/Magnets (I) and attach to clean, dry
back side of AC power strip (not included). Cleaning of power strip surface with
rubbing alcohol will ensure best adhesive bond. **UNPLUG POWER STRIP
FROM POWER SOURCE BEFORE CLEANING**
Attach AC power strip/surge protector to inside of Upper Horizontal
Beam (N) as shown in illustration above.
Use the slot holes provided to run all wires to and from the desk. Keep
all wires behind folded metal lip—failure to do so will prevent Back Panel
(C) and/or Front Kick Panel (D) from attaching properly.
* AC Power Strip Not Included
4.
1.
2.
3.
I
N