BDI 6301 FORMAT - Manual (Page 5)

5
ASSEMBLY INSTRUCTIONS
BDIUSA . COM CUSTOMERSERVICE @ BDIUSA . COM
FORMAT
6301
Step 7
Attach
Pulls (K) using Screw (M). Place Format Desk in desired location.
Once all of the electrical wires are routed, install
Front Kick Panel (N)
as
shown below. The rear side of panel has magnets that will hold the panel in
place
.
Note: The Format Desk is designed to permit placement in front of
an electrical outlet for easier wiring access.
K x 2
M x 4
N
O