BDI 6301 FORMAT - Manual (Page 4)

4
ASSEMBLY INSTRUCTIONS
BDIUSA . COM CUSTOMERSERVICE @ BDIUSA . COM
FORMAT
6301
Step 6 (optional)
Attach Magnets to AC power strip (power strip not included)
Cleaning of power strip surface with rubbing alcohol will ensure best adhesive
bond. **UNPLUG POWER STRIP FROM POWER SOURCE BEFORE CLEANING**
Remove
Adhesive Foam/Magnets (J)
from the
Upper Horizontal Beam (F). Peel film
from side of the
Adhesive Foam/Magnets (J) and attach to clean, dry back side of AC
power strip.
Attach AC power strip to inside of
Upper Horizontal Beam (F)
as shown
in illustration below.
Use the slot holes provided in
Upper Horizontal Beam (F) to run all
wires to and from the desk. Keep all wires behind folded metal lip—
failure to do so will prevent
Back Panel (O)
and/or
Front Kick Panel (N)
from closing properly.
* AC Power Strip Not Included
1.
2.
3.
J
1.
2.
3.