BDI 8556 VERTICA - Manual (Page 6)

6
a s s e m b l y i n s t r u c t i o n s
bdiusa.com [email protected]
vertica
8556
home theater
Fine tuning your new BDI Vertica Home Theater Furniture
These steps are to be followed after you have unpacked and completed the simple assembly instructions for your
Vertica AV cabinet. Due to jostling in freight or perhaps an uneven floor, the door on your Vertica cabinet may not
appear to be in perfect alignment. Making a few minor adjustments can rectify this situation. Be aware that depending
on your situation, patience and a bit of trial and error are required.
STEP 1 - Level your Vertica unit
Levelers are integrated into each leg assembly and are accessed at the bottom of each cabinet leg using Hex
Wrench (B2). If your floor is uneven, you may extend one or more levelers to attain a level, stable cabinet placement.
Turning the leveler clockwise will extend the leveler; turning it counter-clockwise will retract it.
Optional Flat Panel TV Mount
This BDI cabinet is compatible with BDI’s Arena Flat-Panel TV
Mount #9972 (sold separately), with the following features:
• accommodates most TVs up to 65", 175 lbs
• swivel allows rotating for optimal viewing
• allows adjustable TV mounting height
• accepts and routes cables to and from the TV
For more information, visit www.bdiusa.com