BDI 8556 VERTICA - Manual (Page 4)

4
a s s e m b l y i n s t r u c t i o n s
bdiusa.com [email protected]
vertica
8556
home theater
Step 7
Position Cabinet right side up while carefully supporting drawer fronts to
prevent drawers from sliding open. Install Back Panel (M) to the backside of
the Cabinet (C) by inserting top edge in upper channel then tipping bottom
edge forward and into lower channel.
1
2
C
M
The shelf pins located inside the left
cabinet space may be repositioned,
allowing you to raise and lower the
Adjustable Shelf (L) to the desired
level.
Step 8
Open drawers by pushing center of drawer faces.
Optional
Remove screw on each of the drawer slides on
underside of drawer body using the Phillips
Screwdriver (A). Two screws per drawer totaling
in 6 screws to be removed.
TWO PERSON ASSEMBLY