BDI 9981 REVO - Manual (Page 2)

2
assembly instructions
bdiusa . com customerservice @ bdiusa . com
Step 2
Confirm that Shelf Pins (B) are pre-installed.
In order to adjust height, one must remove
the glass retention clip (secured by the
shelf pin) that holds the glass shelves in
place.
Loosen the 4 1. Shelf Pins (B)
1 turn with Phillips Screwdriver
(D).
Remove
2.
Retention Clips (C) ( x 4 )
Unscrew 3. Shelf Pins (B) completely
Reposition the 4. Shelf Pins (B) at
desired height
Secure Glass Shelves
To secure the shelves on your Revo unit, it is
necessary to use the
Retention Clip (C), which
is secured by the Shelf Pin (B).
Install
5.
Glass Shelves (A x 2)
Install
6.
Retention Clips (C) as shown in
“Pin Assembly Diagram”
Secure by tightening the
7. Shelf Pin (B)
with Phillips Screwdriver (D).
A x 2
Retention clip (C)
Shelf pin (B)
Detail of Shelf Pin (B) and
Retention Clip (C)
1
1
4 4
1 : Retention clip (C)
2 : Glass Shelf (A)
3 : Shelf Pin (B)
4 : Cabinet wall
Pin Assembly Diagram