BDI 8224 MIRAGE - Manual (Page 3)

3
assembly instructions
bdiusa . com customerservice @ bdiusa . com
Step 5
Re-install Shelves
Position the cabinet right side up and then re-install Adjustable
Shelves (M ).
Optional Flat Panel TV Mount
This BDI cabinet is compatible with BDI’s Arena Flat-Panel TV Mount #9972
(sold separately), with the following features:
accommodates most TVs up to 60”, 175 lbs
•
swivel allows rotating for optimal viewing
•
allows adjustable TV mounting height
•
accepts and routes cables to and from the TV
•
For more information, visit www.bdiusa.com
Step 6
Install Back Panel
Install both Back Panels (N) to the backside of the cabinet by insert-
ing top edge in upper channel, then tipping bottom edge forward
and into lower channel.
NOTE: : Velcro straps are included as wire management for your
convenience.
1
2
For more information about the adjustable levelers
and troubleshooting assembly, be sure to check out
“Fine tuning your new BDI Mirage Home Theater
Furniture” at the end of these instructions.
The adjustable leveler glides on the
bottom, mid section of the cabinet
are accessible from inside the
cabinet using the Hex Driver (B).
The shelf pins located inside the
left and right cabinet space may
be repositioned, allowing you to
raise or lower each shelf to the
desired level.
B
A
N