BDI 8925 AVION - Manual (Page 3)

3
assembly instructions
bdiusa . com customerservice @ bdiusa . com
Step 6
Optional fabric speaker or glass insert panel
Avion’s drawer and door fronts feature removable/replaceable
panel inserts to permit customization of your cabinet’s appearance
and utility. (Contact BDI Customer Service at customerservice@
bdiusa.com)
Installing optional panel inserts is quick and easy:
1. From the inside of the door, and starting at one corner of
the pre-installed Glass or Speaker panel insert, carefully pull away
all four sections of the panel retention trim, running along the
perimeter of the insert. (Use a blunt, tapered object or your finger
to start removing the rubber material.)
2. Once the trim material is completely pulled away, remove the
pre-installed panel insert and replace it with the desired panel
insert.
3. Re-install the trim, pressing it carefully back into the groove
around the new panel insert, section by section, to complete the
panel insert installation.
Step 5
Install both Back Panels (M) to the backside of the cabinet.
*Note: Velcro straps are included as wire management for your
convenience.
a. Remove rubber trim and
glass panel.
b. Replace insert panel