BDI 8925 AVION - Manual (Page 2)

2
assembly instructions
bdiusa . com customerservice @ bdiusa . com
3
Step 4
Install Handles (J) on the doors and drawers using the
M4 x
25mm Screws (I) and the Phillips Screwdriver (A) supplied.
Step 3
Carefully lay Assembled Cabinet (F) back-side down. Using
one of 4mm Hex Drivers (B), attach the completed base
assembly to the bottom of the Assembled Cabinet (F)
with
1/4”-20 x 2” Machine Screws (E) . *Note: Each of the
metal legs has levelers that can be adjusted from inside the
cabinet using one of the 4mm Hex Drivers (B).
J
Adjustable shelf pins (pre-installed) may be repositioned,
allowing you to raise or lower the adjustable shelf to the
desired level. Install Adjustable Shelf (K) inside the left and
right cabinet area. *Note: To place the adjustable shelf
inside the cabinet, the shelf must be tilted sideways to clear
the door opening.
F
Completed base
assembly
I
E x 6