Balanced Audio REX II Preamplifier - Manual (Page 21)

21
REMOTE CONTROL FUNCTIONS:
The optional VK-R3 remote control that comes with your REX II has the following
functions:
Volume Up and Volume Down control
Mute function
Fade Down/Fade Up function
Input Source Selection 1 through 5
Phase switch
Function switch
Display/POWER switch.
The following describes these functions.
Volume Up and Down
These two buttons are programmed with variable speed volume change profiles.
The rate of volume change will be slow upon initial pressing of the Volume Up or
Down buttons. Holding the button depressed will cause the rate of change to
accelerate, allowing for more flexible control when large changes in volume are
required.
Mute
Pressing this button will cause the MUTE function in the REX II to toggle between
ON and OFF states. The Mute LED on the REX II front panel will reflect the status of
the Mute circuit.
Fade
Pressing the FADE button on the VK-R3 remote control will cause the volume to
smoothly decay over the period of several seconds. This allows for a gradual
reduction in volume, as opposed to the instantaneous MUTE function. This can be
particularly useful during the presentation or demonstration of your equipment.