Baja Motorsports BA90-2 - Manual (Page 39)

35
RIDING YOUR ATV
RIDING THROUGH WATER
You can ride the ATV through shallow water. Make sure it is not more than 10cm
(4 inches) deep and is not moving fast. Choose a good place to cross before
you ride through the water. Look for a spot where the banks are gently sloped
on both sides and the bottom of the stream is hard. If you are unfamiliar with the
area, park the ATV and inspect the stream first to find a suitable spot for crossing.
When crossing, operate the ATV at a slow, steady speed. Be careful not to damage
banks when crossing.
WARNING
Operating this ATV through deep or fast flowing water.
Tires may float, causing loss of traction and loss of control, which could lead
to an accident.
Never operate this ATV in fast flowing water or in water deeper than described
in this owner’s manual.
Remember that wet brakes may have reduced stopping ability. Test your
brakes after leaving water. If necessary, apply the brakes several times to let
friction dry out the linings.
CAUTION
Operating the ATV in water, sand, or mud causes rapid brake wear.
Excessive brake wear could cause the brakes to be less effective.
After repeated operation of the ATV in these conditions, bring it to your
authorized service center to have the brakes inspected and cleaned.
!