Baja Motorsports BA90-2 - Manual (Page 26)

22
STARTING THE ENGINE
Before attempting to start the engine, make sure to
follow these steps.
1. Turn the key switch to the “ON” position.
2. Set the engine stop switch to the “RUN“
position.
3. If engine is cold, set choke lever to the down
position.
4. Apply the rear brake lever and make sure that
the rear wheels are in locking condition.
5. Press the yellow starter button “START” to start
the engine.
6. After engine has warmed up, set choke to up
position
WARNING
Running your ATV indoors where there is little or no ventilation could be
hazardous.
Breathing in exhaust gases from the ATV could cause severe injury.
Always run your ATV outdoors where there is fresh air.
Choke Lever
ON
OFF
WARNING
The ATV could start moving as soon as you start the engine.
Unexpected movement could cause you to lose control of the ATV.
Be sure to set the parking brake before you start the engine.
OFF
RUN
Engine stop
switch
Ignition key
switch
RIDING YOUR ATV