Baja Motorsports BA90-2 - Manual (Page 19)

15
Use throttle adjusting screw to restrict maximum speed of ATV. Adjust this
limiter according to rider’s skill and experience.
Adjusting procedures:
1. Loosen Lock nut
2. Turn the throttle adjusting screw clockwise to restrict maximum speed of
the ATV.
3. Turn the throttle adjusting screw counterclockwise to increase the
maximum speed of the ATV.
4. After finished, tighten the lock nut
FUEL VALVE
There are two positions: “ON” and “OFF”. See the picture below for the
correct operation of these two fuel valves.
FUEL TANK CAP
To open the fuel tank cap, take the end of the vent
tube out from the vehicle body; turn the fuel tank
cap counterclockwise. To close the fuel tank cap,
turn it clockwise and tighten it securely. Be sure
that the vent tube securely connects to the cap
as shown.
Fuel level
Filler neck
“ON” position
In this position, fuel will flow to
the carburetor when the engine is
running
or being started.
“OFF” position
No fuel will flow into the
carburetor.
Fuel tank
cap
CONTROL FUNCTIONS