beautypg.com

Baby Lock Ellegante 3 (BLG3) Instruction and Reference Guide Addendum User Manual

Page 26

background image

24

o

Gently pull the upper thread to bring the
bobbin thread up through the needle plate.

→ A loop of the bobbin thread comes out through the

hole in the needle plate.

p

Insert tweezers through bobbin thread loop
and pull bobbin thread above the needle
plate.

q

Align the upper thread and bobbin thread,
and then pull out about 10 cm (approx.
4 inches) of the threads and pass them under
the presser foot toward the rear of the
machine.

r

Install the bobbin cover.

a

Bobbin cover

→ This completes the upper and lower threading.