Baby Lock Ellegante 3 (BLG3) Instruction and Reference Guide Addendum - Manual (Page 11)

9
E
NGLIS
H
a
Press .
b
Select the pattern, and edit it if necessary.
c
Press , and then display P. 6 of the
settings screen.
d
Use to specify the distance between
the pattern and the appliqué outline.
e
Press to return to the previous screen.
f
Press .
g
Press .
Note
• Finish editing the pattern before selecting the
appliqué setting. If the pattern is edited after
selecting the appliqué setting, the appliqué stitching
and pattern may become misaligned.
• Since an outline is added, the pattern for an
appliqué piece (when the appliqué setting is
selected) will be larger than the original pattern.
First, adjust the size and position of the pattern as
shown below.
a Embroidering area
b Approx. 1 cm
c Pattern size
Memo
• Three settings are available: 1 (narrow), 2 (normal)
and 3 (wide).
• The setting remains selected even if the machine is
turned off.