beautypg.com

Baby Lock Ellegante 3 (BLG3) Instruction and Reference Guide Addendum User Manual

Page 12

background image

10

h

Press

to select the appliqué setting.

→ The steps for creating the appliqué piece are added

to the sewing order.

i

Press .

j

Fuse or stick a piece of stabilizer to the back
of the felt or denim fabric to be used as the
appliqué piece.

k

Hoop the appliqué fabric in the embroidery
frame, attach the embroidery frame to the
machine, and then start embroidering.

l

After the pattern is embroidered, thread the
machine with the thread for the cutting line,
and then sew the cutting line (APPLIQUE
MATERIAL).

a

Cutting line for appliqué

Memo

• To cancel the setting, press

.

• If no pattern is selected, the key appears gray and

cannot be selected.

Memo

• Three steps are added to the sewing order: appliqué

cutting line, position of pattern placement on the
garment, and appliqué stitching.

a

Cutting line for appliqué

b

Position of pattern placement on garment

c

Appliqué stitching

Note

• An appliqué piece cannot be created if the pattern is

too large or too complicated or a combined pattern
is separated. Even if the selected pattern fits within
the embroidering area, the entire appliqué pattern
may exceed the embroidering area when the outline
is added. If an error message appears, select a
different pattern or edit it.

Note

• For best results, be sure to use stabilizer material for

embroidering.

Memo

• We recommend using thread for the cutting line that

is closest to the color of the fabric.