Baby Lock Ellegante 3 (BLG3) Instruction and Reference Guide Addendum - Manual (Page 14)

12
s
Use scissors to cut the excess water-soluble
stabilizer from outside the appliqué outline.
t
Soak the appliqué piece in water to dissolve
the water-soluble stabilizer.
u
Dry the appliqué piece, and then iron it if
necessary.
■ Using a Frame Pattern for the Outline
Using a frame pattern, the desired shape can be
added as the outline of the appliqué.
a
Perform the operations described in steps
a
through
e
of “Creating an Appliqué Piece”.
b
Select the desired frame shape and pattern,
and add it to the appliqué pattern.
c
Edit the frame pattern to fit the size of the
appliqué pattern.
d
Press to select the appliqué piece
setting.
e
Press .
Note
• Do not apply a strong force when ironing, otherwise
the stitching may be damaged.