Avionics Innovations DMP-200 (MP3 Player) Operation Manual - Manual (Page 8)

DMP-200 USERS GUIDE PAGE 8 OF 24
P/N DMP8011-00 REV C
3.2 Playing a Speech File
Rotate the knob CW or CCW until the title of the desired file is displayed. If
“RETURN TO MENU” is displayed at either position, push the knob and then
rotate fully CW or CCW.
Push the knob to begin playback. The file will be played once for each language
enabled, if the file exists in those languages.
The display indicates that playback is in progress. This display can either be
elapsed playback time, or can be cycling user prompts. Please see the DMP-200
Installation Manual for more information.
When playback is complete, the audio stops and the display points to the NEXT
speech file, as if the knob had been turned CW once.
3.3 Playing a Music File
Rotate the knob CW or CCW until the name of the desired music list is displayed.
If “RETURN TO MENU” is displayed at either end, push the knob and then rotate
CW or CCW to select.
Push the knob to select the music list. Then rotate the knob to select either
“PLAY WHOLE LIST” or the desired music track. Push the knob to begin
playback. The display can either be elapsed playback time, or can be cycling user
prompts. Please see the DMP-200 Installation Manual for more information.
Instead of explicitly choosing a music list and music track, you can select
“CONTINUOUS MIX” at the top-level menu. This will play a continuous random
selection of all music tracks on the card.
3.4 Pausing Playback
Press the knob. This will put the playback into “PAUSED” mode.
To resume playback, press the knob again.
3.5 Canceling Playback
Press and hold the knob for at least three seconds.