Avionics Innovations DMP-200 (MP3 Player) Operation Manual - Manual (Page 18)

DMP-200 USERS GUIDE PAGE 18 OF 24
P/N DMP8011-00 REV C
6.4.4 Selecting Internal or External Chime
The DMP-200 may be interfaced to an external cabin chime or tone generator. A
chime will be sounded whenever a speech track is selected or triggered (selecting or
triggering a music track will not sound a chime.) When sounding an external chime,
the DMP-200 will pause for several seconds before starting to play the track, to allow
the chime to finish. The exact length of this pause can be configured in Setup Mode.
Please refer to the “DMP-200 Installation Guide”, AI document number DMP8010-00,
for information on entering Setup Mode and changing this setting.
You can also choose an MP3 file to be played as the chime sound. Select Internal
Chime and then click Browse to select the MP3 file to be played. Several chime
sounds are provided in the /Chimes directory under the main CardPrep directory.
Note that when internal chime is selected, the DMP-200 does not activate the external
chime signal. This allows you to switch between cards using internal or external
chimes without having to physically disable the external chime.
To defeat chiming completely, select Disable chime. There will be no delay when
playing a speech track, and the external chime signal will not be activated.
6.4.5 Changing System Prompts
Most of the text displayed by the DMP-200 in normal operation is actually stored on the
memory card and can be changed via CardPrep. This was intended to allow for
translation of the system prompts into languages other than English. Clicking on the
“System Text...” button brings up the following screen: