Avionics Innovations DMP-200 (MP3 Player) Operation Manual - Manual (Page 12)

DMP-200 USERS GUIDE PAGE 12 OF 24
P/N DMP8011-00 REV C
1. Click on the small box under (1), type the display title of the speech file, and press
Add. Repeat for all remaining speech files.
2. Click on the small box under (2), type the first language to be displayed, and
press Add. Repeat for all remaining languages.
3. Click on a title in the large box under (1), and then click on a language in the large
box under (2). Next, click on the box under (3) and either type in the path or click
Browse to identify the MP3 file which corresponds to the selected title and
language. Repeat this procedure for every title and language combination for
which a track is to be added.
4. Click on the up and down arrows next to each box to move a highlighted
selection within the box. This allows you to control the order in which speech
tracks or languages are displayed on the DMP-200.
6.2.2 To add Music Files:
Music files may be added either individually, like speech files, or in groups. You can add
all the MP3 files in a particular folder, or you can add MP3 files contained in a playlist.
Playlists are created using an MP3 manager such as iTunes, WinAmp or MusicMatch.
Cardprep can read playlists that have been saved as either “.txt” or as “.m3u” files.
6.2.2.1 Adding Music Files Individually
If you are adding a small number of files, or if the files are scattered in different locations,
follow these steps to add each file individually: