Avionics Innovations DMP-200 (MP3 Player) Operation Manual - Manual (Page 17)

DMP-200 USERS GUIDE PAGE 17 OF 24
P/N DMP8011-00 REV C
6.4 To Select Setup Items:
6.4.1 Default Languages Enabled
Select and highlight one or more languages to be enabled on power up. Note that
this screen is potentially confusing: the desired language(s) must be highlighted to be
selected. If none are highlighted, the list simply displays the languages on the card.
6.4.2 Custom Card Titles
Up to two lines of 16 characters each can be displayed on the DMP-200 after the
initial screen on power up. This can be used to identify the card, to greet the operator,
to provide special instructions, etc.
6.4.3 Chiming Between Speech Tracks
If a chime (either internal or external) is enabled, these setting controls whether the
chime sounds between the playing of each language of a speech track, or just once
(before the first language).