Avery Dennison SNAP USB Communications - Manual (Page 4)

Setting Up PCMate
To use the network connection, connect the printer normally in PCMate Platinum.
Select the virtual COM port indicated in the USB Driver.
With a serial connection, either the printer or PCMate can start a connection, so it
doesn’t matter which is started first. Because the USB connection is made by the
host, the printer must be turned on and connected to the network before PCMate
Platinum is started. Also, if the printer is turned off and back on, PCMate
Platinum must be closed and restarted.
PCMate USB Communications_V10.doc Page 4 of 4