Avery Dennison Monarch 9906 Internal Liner Take-Up - Manual (Page 2)

2 Internal Liner Take-up Operating Instructions
8. Hold the liner while placing one end of the take-up bail in one of the grooves in the take-up
core. Gently rotate the bail counter-clockwise until the other end snaps into place in the
corresponding groove in the core.
Rest the bail in the bottom groove
and rotate it counter-clockwise as
shown.
9. Gently slide the bail all the way onto the core.
10. Close the printhead assembly until you hear it click in to place.
11. Close the printer’s cover.
12. Close the exit cover.
13. Press FEED to position the supply under the printhead.