Avery Dennison Monarch 9416 XL Fixed Format - Manual (Page 7)

Introduction 1-3
C o n n e c t i n g t h e C a b l e s
1. Turn OFF the printer before you connect any cables.
2. Plug the 9-pin coiled keyboard cable into the 9 pin connector on the
interface cable.
3. Secure the other 9 pin end of the interface cable to the 9-pin port on
the printer. Tighten the screws on the cable connectors.
4. Connect the power cord to the power supplies. The small power
supply goes to the Keyboard. The large power supply goes to the
printer.
5. Connect the power supply to the printer and the power supply to the
keyboard.
ON/OFF
Switch
Keyboard
Cable goes here
Printer
P o w e r S u p p l y
Keyboard
P o w e r S u p p l y
Power
Connector
Interface
Cable
Power Cords
Optional Scanner
Cable