Avery Dennison Monarch 9416 XL Ethernet - Manual (Page 2)

U s i n g t h e P r i n t S e r v e r U t i l i t y
1. Run the M0916Util.exe file. You see the main
screen.
2. Enter any changes to the real time clock or click Get
System Time to change the time. Then, click Set.
3. For DHCP, select DHCP. When using a static IP
address, select Static IP. Then, enter the IP Address,
Subnet Mask, and Gateway. Click Set IP when
finished.
4. Enter a Printer Name. Then, click Set Printer Name.
5. Click Exit when finished.
Resetting the Printer
♦ Click Factory Default from the main screen to return
the printer to factory default settings.
♦ Click Reset Printer from the web browser screen to
reset the printer. This is the same as turning off the
printer and then back on. See "Using a Web Browser"
for more information.
2