Avery Dennison Platinum 6039 Screen Protector - Manual (Page 2)

R e m o v i n g t h e S c r e e n P r o t e c t o r
1. Use a piece of adhesive tape to grab one corner of
the screen protector.
2. Pull back to remove the screen protector from the
printer display.
♦ If you see dust or lint on your touch screen display,
remove the screen protector, clean it and the display
with a soft cloth moistened slightly with distilled water
and allow to dry before reinstalling. Do not use
household cleaners to clean the printer.
♦ “Oil spots” may appear if the screen protector is
installed wrong side up. Remove the screen protector,
turn it over, and reinstall.