Avery Dennison 9450 RASCAL Addendum 3 - Manual (Page 2)

2
U s i n g t h e F a s t C h a r g e r
To charge a battery:
1. Remove the battery from the printer.
2. Plug the charger's connector into the socket on the battery as
shown:
9450™ Printers
use Fast Charger:
#117209-01 (115V)
#117209-02 (230V)
9490™ Printers
use Fast Charger:
#117375 (115V)
#116579 (230V)
Pathfinder® Printers
use Fast Charger:
#6093-07 (115V)
#6093-08 (230V)
3. Plug the charger into a grounded electrical outlet. Charging
should be complete within two hours.
4. When the battery is charged, unplug the charger from the
battery. The battery is fully charged when the amber indicator is
fast blinking.