Avery Dennison 7410 Network Card Addendum User Manual
Page 3
3
8. Select Enable Network Time.
9. Enter the Time Server’s IP Address. The printer waits 20 seconds for
the server to respond. The status is displayed within parentheses:
“Waiting for Server,” “Time Server Error,” or the current date and time.
10. Enter the Time Zone Adjustment in hours and minutes, from Greenwich
Mean Time (GMT). This offset varies by location and time zone. For
example, Eastern/Standard time is five hours behind GMT. Use –5:00
for the offset. For an offset of 3.5 hours, use 3:30.
Note: Changes for Daylight Savings Time are not made automatically. If
your time zone participates in Daylight Savings Time, change the
time zone offset accordingly.
11. You can specify if the Web pages time out after five (5) minutes of
inactivity. Select Enable Web Authorization Timeout.
Note: The time out period is set for five minutes and cannot be changed.
12. Make any other TCP/IP settings and click Submit when finished.
13. Click BACK to return to the previous screen.
W e b p a g e s t i m e o u t a f t e r f i v e
m i n u t e s o f i n a c t i v i t y .
S h o w s t h e
s t a t u s o f t h e
t i m e s e r v e r .
E n a b l e N e t w o r k
T i m e a n d e n t e r
S e r v e r ’ s I P
A d d r e s s a n d
T i m e Z o n e
O f f s e t