beautypg.com

Avery Dennison 1115 Monarch User Manual

Monarch, Labeler operating instructions

background image

®

Monarch

®

1115

®

Labeler

Operating Instructions

TC1115OI Rev. BE 12/07 ©2006 Paxar Americas, Inc.
a subsidiary of Avery Dennison Corp. All rights reserved.

LOADING LABELS & SETTING PRINT BANDS

LOADING LABELS

1

Slide label roll between hubs.

Discard first fourteen labels

and backing paper.

2

Squeeze operating lever and feed

label strip over spring and under brake

wheels until about twelve labels come out.

3

Feed label strip up under plate until

two labels come out. Rewind

label roll until loop is removed.

4

Pull backing paper to the end of the

operating lever, separating labels from

backing paper.

5

Tear backing paper evenly
between cuts, close to the end of the

strip as shown.

6

Hold labeler upside down and while
squeezing operating lever, feed

backing paper into slot. Squeeze operating
lever eight times until backing paper comes
through the rear exit.

7

If backing paper does not become

taut and exit at rear: Turn labeler

upside down, squeeze operating lever and
pull backing paper out of slot. Repeat
steps, 4, 5, and 6.

SETTING PRINT BANDS

1

Pull the knob until the
indicators point to

the desired band.

4

Print a sample label to insure

information is correct.

2

Turn the knob untill the indicators
point to desired character or blank.

5

If the character prints UPSIDE

DOWN, turn the band until you can

read the characters correctly. The desired
character may be coated with ink.

3

Set all bands and push the knob
in all the way.

INKING

1

Move two latch buttons toward
label roll and swing top cover

away from print head.

2

Fold a piece of scrap backing

paper.

3

Insert folded backing paper
between ink roll and carrier.

Pull to snap old ink roll free.

4

Cut off end of ink roll package.
Using package to protect fingers,

slide carrier into package and snap new ink roll
into carrier.

5

Snap top cover closed.

Hang for easy reference.

Brake
Wheels

Label Exit

Operating
Lever

Label Exit

Loop

Plate

Hub

Backing
Paper

Discarded
Labels

Slot

Backing
Paper Exit

Knob

Indicator

Blank Print
Positions

Top Cover

Latch
Button

INKING

Cap
End

Carrier