Avery Dennison Monarch 1730 - Manual (Page 2)

2
L O A D I N G L A R G E C O R E S U P P L Y
1. Remove both reels from the reel support
stud.
2. Turn the supply arm lock counter-
clockwise to unlock the supply arm.
3. Lift the supply arm and turn the lock
clockwise to lock the supply arm.
4. Turn the supply stud counter-clockwise
and remove it.
5. Insert the support stud into the second
position and turn it clockwise to lock.
6. Insert the flange onto the outer reel.
7. When using string tags, shake the roll to
untangle the strings. Next turn the roll
over and brush the strings outward.
8. Place the inner reel hub into the supply
roll. Make sure the strings are not
caught between the hub and roll.
9. Insert the spindle of the outer reel into
the supply roll and inner reel hub.
10. Snap the reel assembly on the reel
support stud.
11. Insert the second flange onto the inner
reel when using non-string tags.
12. Insert the spindle of the outer reel into
the supply roll and inner reel hub.
13. Snap the assembly on the reel support
stud. Make sure labels unwind easily.
14. Lay the supply strip over the unwind
spring, under the feed guide, and
to the anti-backup roller.
Reels
Supply
Arm
Lock
Second
Position
Inner
Reel
Hub
Reel
Support
Stud
Inner
Reel
Anti-backup Roller
Feed Guide
Second
Flange