Avalon Firestyles 1080 CF Installation - Manual (Page 53)

Finalizing the Installation
(for qualified installers only)
53
© Travis Industries 4090807 100-01193_003
5 Follow the directions below to replace the orifice.
1/2" Wrench
Use a 1/2” open end wrench
to unscrew the orifice.
Screw each LP orifice in so the
orifice protrudes 15/16”
(indicating full insertion).
Look here for the orifice identification
Apply thread sealant to the LP
orifices prior to installation. Use
the chart below to identify the
correct orifices.
NG
#33
LP
#50
c
b
15/16”
a
Burner Orifice
Manifold
Burner Orifice
Figure 33