Avalon Firestyles 1080 CF Installation - Manual (Page 50)

50 Finalizing the Installation
(for qualified installers only)
© Travis Industries 4090807 100-01193_003
Ember Placement
Place the embers along the firebox floor and burner to help conceal the burner. Make sure none of
the embers are directly over the burner holes. See the photo below.
Rock Wool Placement
The included rock wool is placed on top of the burner to enhance the glow from the burner. The
rock wool works best when it is applied in a very thin, porous layer. The best method for
applying the rock wool is to brush it on to the burner. Compress a clump of rockwool between your
thumb and forefinger. Use a stiff brush to apply a thin layer of rockwool fibers onto the burner. Do
not use the entire bag of rockwool. Use only a small amount and save the remainder. Over-use of
rockwool will diminish the glow and may cause sooting or other adverse conditions.
Note how the embers do not
cover any burner holes. Place
the embers around the burner
to create a realistic effect.