Artesyn MVME7616E Transition Module Installation and Use (April 2015) - Manual (Page 18)

General Information
MVME7616E Transition Module Installation and Use (6806800A43D) 18
1. You will need to purchase or fabricate the port cables.
Table 1-2 MVME761 Transition Module Connectors
Type Number Description
COM1 and
COM2 J5
J6 9-pin male DIN asynchronous serial port connector
Serial port 3
Serial port 4 J7
J8 26-pin female HD-26 synchronous serial port
connector
Parallel port J4 36-pin female parallel port connector
10Base-T,
100Base-TX J9 8-pin female RJ-45 Ethernet port connector
SIM J1, J12 60-pin female connector
VME P2 64-pin male connector to J2 on the P2 adapter
Table 1-3 3-Row P2 Adapter Connectors (MVME761-001)
Type Number Description
VME P1 96-pin female DIN 41612 connector to the chassis backplane
J3 64-pin male connector for output to P2 on the MVME761 transition
module
SCSI J2 50-pin male IDC connector for internal SCSI devices
Table 1-4 5-Row P2 Adapter Connectors (MVME761-011)
Type Number Description
VME P1 160-pin female DIN 41612 connector to the chassis backplane
J4 64-pin male connector for output to P2 on the MVME761
transition module
PMC I/O J3 64-pin male connector for PMC I/O
SCSI J1 68-pin female IDC connector for internal SCSI devices