Artesyn COMX-P4080-2G-ENP2 Installation and Use (August 2014) - Manual (Page 63)

BSP
COMX-P4080-2G-ENP2 Installation and Use (6806800P63B) 63
Commands
1. Build by default

make uboot
2. Build Targets supported for UBoot
 uboot:
configures and builds u-boot.bin for NOR flash
 uboot-clean:
cleans the u-boot
Output
The built image is u-boot.bin in the current working directory.
7.3.2 Build Linux Kernal
The Linux kernel is based on SDK1.0 whose version is 2.6.34.6.
Commands
1. Build by default
 make kernel dtb
2. Build Targets supported for Linux kernel

config-default
: copies the COMX-P4080 default configuration to current
configuration
 kernel-config
: configures the kernel based on current configuration
 kernel
: compiles kernel with current configuration
 kernel-clean
: cleans the kernel
 dtb
: compiles device tree binary
Output
The build images are uImage and comx.dtb in the current working directory
7.3.3 Build ROOTFS
The rootfs for SCP-P4080-2G-ENP2 include RAMDISK and NFS.