Artesyn COMX-P2020 Installation and Use (July 2014) - Manual (Page 23)

Chapter 1
COMX-P2020 COM Express Module Installation and Use (6806800K97D) 23
Introduction
1.1 Features
COMX-P2020 COM Express Module is a COM Express module based on the Freescale P2020
processor. COM Express is an industry-standard embedded computer module defined by
PICMG.
The following table summarizes the features of COMX-P2020 COM Express Module.
Table 1-1 COMX-P2020 Features Summary
Function Features
Processor  Freescale P2020 Processor
–
Designed for P1020/P1011/P1021/P1012 with
no validation
– Dual e500v2 Core, 800MHz to 1.2GHz clock
frequency
– Power consumption of less than 8W at 1.2GHz
– 32-KB instruction and 32-KB data first-level
cache (L1) for each core
– 512-KB second-level cache (L2) with ECC
– 64-bit DDR2/DDR3 controller with ECC supports
data rate up to 800Mbps/pin
– 31x31 mm 689-pin wirebond power-BGA
– 45 nm SOI process technology
Memory  Supports 2GB DDR3 667MT/s DDR3+ECC arranged in
two ranks on one slot
SD Card  2 GB MicroSD Card on module
 SDHC signals routed to the COM-E connector
 Storage for bootloader and OS
UART Two full-function UARTs
Video  XGI Z11M supports up to 1280x1024x32@85NI
 Connected to the CPU through the PCI-E x1 lane #0
 Include VGA, LVDS interface
Ethernet Three 10/100/1000Base-T Ethernet interface routed to
COM-E connectors
USB Four USB2.0 ports routed to the COM-E connector