beautypg.com

Firmware upgrade – Artesyn COMX-P1022 Installation and Use (July 2014) User Manual

Page 78

background image

Firmware Upgrade

COMX-P1022 COM Express Module Installation and Use (6806800M04C)

78

=> setenv ethaddr 00:01:af:12:23:01

=> setenv ipaddr 192.168.0.253

=> setenv netmask 255.255.255.0

=> setenv gatewayip 192.168.0.1

=> setenv serverip 192.168.0.197

=> setenv ethact eTSEC1

=> ping 192.168.0.197

Enet starting in 100BT/FD

Speed: 100, full duplex

Using eTSEC1 device

host 192.168.0.197 is alive

5. Set the U-Boot environment variables for upgrade files and upgrade the SPI Flash.

This step may take up to 1 minute.

=> setenv tftppath COMX-P1022/current

=> setenv uboot_spi u-boot-spi.bin

=> run upgradespi

4096 KiB S25FL032A(P) at 0:0 is now current device

Enet starting in 100BT/FD

Speed: 100, full duplex

Using eTSEC1 device

TFTP from server 192.168.0.197; our IP address is 192.168.0.250

Filename 'COMX-P1022/current/u-boot-spi.bin'.

Load address: 0x1000000

Loading: ####################################

done

Bytes transferred = 525312 (80400 hex)

=>