Artesyn COMX-P1022 Installation and Use (July 2014) - Manual (Page 39)

Hardware Preparation and Installation
COMX-P1022 COM Express Module Installation and Use (6806800M04C) 39
6. Press down on the memory module against the COM-E module until you hear it
snap into place. The module must be properly aligned before you press it down into
its final position. You can remove the module from the socket and reinstall it if you
cannot press it down into its final position.
Removing a Memory Module
1. Wear the ESD-preventive wrist strap.
2. Release the module from the slot by pushing the spring latches on either side of the
module outward.
3. Lift the module from the COM-E Module.
Damage of the Product and Additional Devices and Modules
Incorrect installation or removal of additional devices or modules damages the product or
the additional devices or modules.
Before installing or removing additional devices or modules, read the respective
documentation and use appropriate tools.