Artesyn COMX-P1022 Installation and Use (July 2014) - Manual (Page 38)

Hardware Preparation and Installation
COMX-P1022 COM Express Module Installation and Use (6806800M04C) 38
Installing a Memory Module
1. Wear the ESD-preventive wrist strap.
2. Lay the COM-E module where the SODIMM is to be installed on the anti-static
desktop.
3. Take the SODIMM out of the anti-static package, holding it by the edges.
4. Line up the notch located on the row of the metal pins at the bottom of the module
with the key in the SODIMM slot on the COM-E module.
5. Insert the SODIMM in a slantwise position or at a 45-degree angle to slide the
memory module into place.